Alan Clarke, technical support manager at Heatrae Sadia, tells us more about electric wet central heating boilers and explains what the Ecodesign and Energy Labelling Directives (generally referred to as the ErP Directive) mean for the market.
Electric heating is an ideal solution when mains gas isn't available, or it isn't a practical option due to installation or maintenance issues. Compared to mains gas, there are generally few restrictions on the supply of electricity, and there aren't any flueing, condensate drainage or plumbing issues to consider.
Electric wet central heating
Fortunately, the electric heating market has moved on from the inflexible, largely uncontrollable night storage heaters that electric heating was once associated with. Heaters which store energy overnight and release it during the day (whether or not it's needed) are not an appropriate solution for today's consumer - and so innovative, sophisticated, controllable products that provide heating and hot water when the end user wants it have been developed.
One of the main advancements has been the introduction of electric wet central heating flow boilers. Compact, wall hung and efficient, electric wet central heating boilers are used in conjunction with conventional wet radiators or underfloor heating systems, and provide central heating on demand, when it's actually needed. They are controlled and operated by a programmer and thermostat, working in a similar way to a gas fired boiler. Our Amptec electric boiler even modulates in the same way as a gas boiler, improving running efficiency.
To supply hot water to all-electric properties, electric boilers can be teamed with direct cylinders. High-performance unvented hot water cylinders, which are fed directly from the cold water mains, will provide the end user with powerful showers and fast filling baths. Our Megaflo Eco can deliver up to 72 litres per minute of hot water, and there's no significant difference in performance if more than one tap or shower is used simultaneously (depending on the mains water pressure and flow rate coming into the property).
Some electric boilers can have an operating life similar to a traditional cast iron gas boiler (which can boast a lifespan of around 25 years). High-quality products that last might cost more initially, but will save the customer money in the long run, while also providing peace of mind.
To ensure that our Amptec boilers have a long operational life, several key features were designed into the product. For example, we use solid state technology for the switching of the heating elements to ensure a much longer switching life compared to what is achievable using conventional electro-mechanical devices such as relays and contactors. We believe that only solid state technology is suitable for the typical switching life required for a long-lasting electric boiler, and we avoid using mechanical relays to switch the heating elements on and off.
In addition, the heating elements used in Amptec are designed to run at low Watts density, which is essential to prolong the boiler's life, and we chose copper sheathed elements, as in this particular application they last longer than other materials.
In addition to Amptec, Heatrae Sadia has also combined an electric boiler and a hot water cylinder into a 'one box' solution. Electromax provides full wet central heating and unvented domestic hot water from one compact unit. Factory assembled and tested and pre-plumbed, it's really simple to install.
Efficiency, Ecodesign and Energy Labelling
Since September 26 this year, electric boilers of up to 400kW (along with other types of space and combi space heater) have needed to meet minimum energy performance criteria in order to be legally placed on the EU market, in accordance with the Ecodesign Directive (commonly referred to as the ErP Directive).
And through the complementary Energy Labelling Directive, which has applied to space heaters and combi space heaters of 70kW and below (including electric boilers) since the same date, electric boilers are now supplied with energy labels, similar to those seen on fridges and washing machines.
Manufacturers must meet the requirements of the regulation (conforming to the energy and environmental standards) in order to legally place their product on the market in the UK and other countries in the European Economic Area.
Due to the 'fuel factor' that is added to all electrically powered products, electric boilers are (at the time of writing) likely to have a D rating. It is important to remember - and to communicate to customers - that this is because the generation of electricity is currently viewed as carbon intensive and electric heating products are therefore penalised. However, we believe this is a short-sighted view, as at the point of use electric products are very efficient - Amptec, for example, is 99.8 per cent efficient.
Direct electric cylinders are also affected by Ecodesign and Energy Labelling; from September 26 2015 water heaters with a rated output of up to 400kW and hot water storage tanks with a storage volume of up to 2,000 litres have needed to meet minimum energy performance criteria, and those with outputs of up to 70kW and storage volumes of up to 500 litres have required an energy label. All direct electric water heaters are likely to be in the C category, again due to the 'fuel factor' applied to electrically powered products.
The electric heating market has been revolutionised by electric wet central heating boilers. Flexible, controllable, simple, cost-effective to install, low maintenance, they offer a viable alternative when mains gas isn't an option, and are increasingly being specified as the preferred choice for urban high-rise developments.
Further information can be obtained by calling 01603 420 220
Engineered in Britain.